The tie rod on a vehicle connects the lower and upper containment arm to the front brake spindle. Nevertheless, whether you strike an article such as a profound pothole or the side of a curb, you can bend your tie rod. City a jack under the frame, directly at the end the front spin. Jack up the motorcar and city it on a jack stand. Remove the lug nuts and pull the trundle off of the rotor.2.
Instructions
1. Loosen the trundle's lug nuts with a tire iron. This mode that the vehicle's revolve Testament not sit properly on the pathway surface. Your vehicle Testament shake when you impel it or it Testament not steer straight. A bent tire rod can besides division (causing an accident) provided you conclude not remove it.
Utilize a socket and ratchet to remove the two bolts on the back of the brake caliper that secure the caliper to the brake spindle.
3. Pull the caliper off of the brake and hang it from the suspension with a wire tie.
4. Locate the tie rod behind the brake caliper. It is a vertical bar that bolts to the upper and lower control arms where the arms secure the brake spindle.
5. Use a socket and ratchet to remove the nut that secures the tie rod to the upper control arm.
6. Use a rubber mallet to drive the tie rod down through the lower control arm, and then pull the bent tire rod free from the lower control arm.
.jpg)
