Performance Tool's brake calipers can cater that Ending touch to any custom motorcycle, offering a relatively lucid bolt-on installation that can be performed with a minimal size of tools. Enchanting a infrequent moments to contain your motorcycle's fenders and fairings can force a elongate road in protecting them from the risk of damage during the business. Expect the effort to cut a minimum of 30 minutes for a unmarried caliper installation while dual brake setups may booty as great as one time.
Instructions
1. Pull in the brake lever to shut the masterly cylinder's piston, preventing the brake fluid from flowing. Wrap a bungee cord all over the brake lever and the handlebar to grasp the lever in accommodation.
2. Loosen the brake caliper mounting bolts on the front fork with a socket or Allen wrench. Loosen the brake border banjo bolt slightly with a socket wrench.
3. Unscrew the brake caliper bolts completely with the socket wrench. Pull the brake caliper off of the front rotor. Suspend the caliper from the handlebars with a bungee cord.
Top off the master cylinder's fluid reservoir with fresh brake fluid before replacing the lid. Secure the caliper to the front fork with the socket or Allen wrench to tighten the caliper mounting bolts.
5. Unscrew the brake path banjo bolt from the beginning caliper with the socket wrench. Pull the brake string and the banjo bolt off of the caliper.
6. Remove the span of copper crush washers from the banjo bolt and transform them with latest crush washers.
7. Assign the brake line onto the Performance Gadget caliper and screw the banjo bolt into levy with the Allen wrench.
8. Unscrew the lid of the brake adept cylinder's fluid reservoir and Proceeds the brake lever. Top the fluid reservoir off with new brake fluid. Situate a abundance of at liberty tubing over the bleeder valve on the heel of the Performance Machine caliper and place the other end of the tubing into a container.
9. Open the bleeder valve with a combination wrench. Pull in the brake lever to force a small amount of brake fluid and air out of the caliper. Release the brake lever slowly then close the bleeder valve. Continue to bleed the brake system, using this method until the brake fluid trapped in the tubing does not contain air bubbles.
10.4. Slide the Performance Gadget caliper over the front brake rotor and onto the front fork. Dwelling a spacer shim between the caliper and its mounting aim on the front fork, as needed, to affiliate the caliper with the front brake rotor.
.jpg)
