Become able to place your laptop's cooling action.
Your laptop's cooling system consists of a cooling fan and a heat sink, which is a metal plate with a copper conduit extending gone of it. When your cooling fan goes evil, it causes your CPU, or processor, to overheat, which can foundation irreparable damage to your laptop's motherboard. In most cases, your cooling system can be prepared by simply cleaning outside the cooling fan meeting. It's for this intellection that usual cleaning and maintenence of your cooling transaction is instrumental to the breath of your laptop.
Instructions
1. Turn off your laptop and disconnect the faculty cable. Disconnect any other cables or extrinsic devices and brisk the LCD panel until it latches shut. Area the laptop face-down and remove the battery pack from its compartment.
2. Country the laptop face-up, then unbarred the LCD panel.3. Remove the Phillips-head screws securing the keyboard to the laptop mould. These screws are normally located below the keyboard bezel.
Pry up the keyboard bezel from the laptop with a flat-head screwdriver. The keyboard bezel sits between the keyboard and the LCD meeting. Remove the bezel and fix it aside. Some laptop models secure the keyboard to the laptop casing from the backside. Those screws are normally located either inside the battery compartment or on either side of the RAM module compartment. Additionally, some laptop keyboards are secured by retaining tabs located carry on the top row of keys on the keyboard.
4. Lift the keyboard away of its compartment and district it face-down over the palm rest. Appliance a inadequate flat-head screwdriver to disengage the dusky tabs on either side of the keyboard ribbon cable where it connects to the motherboard. Disconnect the ribbon cable from the motherboard, and then remove the keyboard from the laptop.
5. Remove the Phillips-head screws from the motherboard/CPU comprehend or EMI shield. The EMI shield is metal plate covering that protects the motherboard and CPU meeting. Remove the EMI shield from the laptop and place it aside. Some laptop models cook not enjoy an EMI shield.
6. Remove the Phillips-head screws securing the cooling fan to the motherboard. Disconnect the fan cable from the motherboard and lift it absent of the laptop meeting.
7. Mop dust off of the cooling fan assemblies exterior with a soft cloth or paper towel. Blow the dust away of the fan with a can of compressed Gauze duster. End a little emulsion brush to remove the dust from deep inside the cooling fan. Work under good lighting so you can visibly see the interior of the fan.
8. Repeat steps one through six in reverse order to re-assemble the laptop.
