Other than a collision, crumb can blot out the structural forthrightness of a vehicle as quickly as rust. These types of panels are distinctive candidates for rust conversion chemicals. These chemicals bring about not in reality remove rust, however instead replace the chemical Essay of the rust to a guarded compound. Rust converters typically consist of a example chemical and an activating agent which must be mixed well-balanced before life applied to the damaged surface. Intent panels which individual retain a slight vastness of surface rust can be repaired by simply sanding the rust out. Severely damage body panels must be replaced, which can be hugely expensive. In between these two extremes are item panels which include some rust damage, on the contrary not Sufficiently to warrant replacement of the panel. Thankfully, using a rust converter is a effortless charge and still besides affordable than panel replacement.
Instructions
1. Applicability a wire brush To cleanse the surface of any lose rust and distemper.
2. Remove all grease, dust and oil from the surface by wiping down the surface with acetone and a clean cloth rag.
3. Ensure that the surface temperature is between 70º-90º and that the humidity does not exceed 60%.
4. Pour a measured amount of the base chemical into a container.
5. Pour a measured amount of the activating agent into the container with the base chemical. Typically, one part of the activating agent should be mixed with four parts of the base chemical. However, the manufacturer's mixing specifications should always be consulted to ensure the mixture is proper.
6. Mix the two chemicals together using a stir stick until the mixture is uniform in color.
7. Use a brush to apply the rust converter mixture to the surface to be treated.
8. Allow the chemical mixture 3-5 hours to dry.
