Replace Rv Window Parts

Cause your own window maintainance to save resources.


When your RV window is stuck or leaking, it is period for some routine repairs and concervation. Depending on the botheration, replacing rotted away moulding or broken latches is potential Homewards with a meagre help tools. Getting the seals constant prevents unwanted leaks or prevents very rotting of the RV walls.


Instructions


Replacing the Molding


1. Unscrew any window brackets and pry elsewhere the Shade and window along with the window mounting bracket.


2. Unscrew the old latch off the window and the window housing. Set the screws aside and discard the old, broken latch.5. Set the new latch pieces on both the window and housing.


Push the new molding into the window frame housing and the apply a single coat of the waterproof caulking. Allow it to dry and then place the screen and window back into the housing and screw down any attachment points and brackets.


Replacing the Window Latch


4. Subsume the pry-bar underneath the moulding rubber --- a dingy or frosted rubber group that goes enclosing the comprehensive frame of the window in the housing. Grab a loose piece of the molding and pull the entire rubber piece out from the window.3.


Align the screw holes and tighten down the latches with the old screws.


6. Open and close the latch to set it into the screw holes and loosen the mechanism.