Remove A Dodge Caravan Cowl

Remove a Dodge Caravan Cowl

The manner takes equal a infrequent minutes with a infrequent average had tools, most of which you probably already chalk up in the garage. Replacement cowls are available on ice the dealer should yours be remodelled damaged.

Instructions

1.Whether you compulsion to access the windscreen wipers linkage or washer hoses, you must remove the cowl from your Dodge Cart. The cowl is attached with a scarce screws and nuts. Emigration is evident and allows you access to the components underneath.

Lift the cap on the foot of the wiper arm where fit connects to the machine. Establish the aficionado under the involve and remove it with a wrench.

2. Position a two-jaw puller on the wiper arm. Turn the screw with a socket and ratchet to exercise impact to the arm. Carry forward turning the screw until the arm comes loose from the stud. Repeat this growth for the contradictory wiper arm.

3. Fix and remove the screws holding the cowl to the wiper module with a Phillips screwdriver. Disengage the quarter turn fasteners on the outer ends of the cowl with a screwdriver.

4. Up thrust the hood of the motorcar and allot the wing nuts along the front path of the cowl. Remove them with your hands or a small wrench if needed. Lower the hood but do not latch it.

5. Remove the outer screws at the far ends of the cowl with a screwdriver. Lift the cowl high enough to access the washer hoses under the cowl. Remove the hose from the left washer nozzle by pulling it straight off the fitting.

6. Remove the washer hose from the right nozzle, pulling it off the fitting under the nozzle. Lift the cowl off the van.