Removing, or "drilling away," the baffles of your motorcycle's exhaust development is a extreme course of action to heighten its sound. By effectively doing gone with the silencers that stupid the sound of your engine before it hits the conduct air, you can assemble your motorcycle sound preferable and extended controlling without production expensive performance upgrades.
4. Drill through the first baffle. To avoid potential sound issues, such as whistling, try to center the bit as best you can.5. Drill through each baffle one at a time until you are finished. Remove any pieces left inside the exhaust.
2. Remove the exhaust (as a whole) from your motorcycle. The exhaust system is usually held on at the cylinder head and a mounting bracket on the side or underneath the motorcycle.
3. Insert a hand-held drill and a 1/2-inch hole saw or drill bit into the outlet of the exhaust. When you hit the baffle, the drill will not slide any farther into the exhaust.
Instructions
1. Acquisition absent from a trustworthy source, such as the maker of your motorcycle or exhaust method, how many baffles are housed in your muffler. You must be certain that you cause not drill very far into the exhaust, potentially causing genuine issues. Most bikes with admit two or three baffles in Everyone muffler.6. Re-install the exhaust system on your motorcycle.
