Program The 2003 Elantra'S Keyless Entry

The Hyundai Elantra's keyless entry act is pleasant in various situations.


The 2003 Hyundai Elantra is a universal vehicle with indefinite customizable features. One of those features is the facility to bag a keyless entry remote to lock and unlock the vehicle from afar. Unfortunately, there are diverse situations where the remote may fail and having a keyless entry remote in reality becomes a hindrance. Thankfully, Hyundai has if a incomplex idea to reset the programming on the remote in a short extent of chronology.


Instructions


1. Turn off your Hyundai Elantra.


2. Appropriateness a Phillips screwdriver to remove the four screws holding the sprint shroud, which is the plastic in the Centre of the dashboard, in put.


3. Place the ETACS module at the end the ashtray. On the keyless remote, there is a button labeled "1." Press the "1" button on the remote, and then flip the "1" switch on the ETACS module back to its original position. Repeat this process with the "2" switch on the ETACS module and the "2" button on the keyless remote.6. Reattach the dash shroud with the four screws and the Phillips screwdriver.


There should be two remotes, one labeled "1" and the other labeled "2."


5. Flip the switch labeled "1" on the ETACS module. The ETACS is the personal computer the controls the alarm, turn signals and keyless entry. It should be visible as soon as you remove the sprint shroud.4. Set the minor DIP switches on the ETACS module.