You may compass to remove a door panel on the 1999 Dodge pickup to modify the door locks or establish a window regulator. The door panels are screwed on, then clipped on at the top with retainers. Provided you pull packed on the panel during the Emigration means, you could damage it. The door panel is counsel over thick cardboard, and it Testament bend or warp easily. The directions are the corresponding for the Ram freight doors.
Instructions
1. Plain the door and roll the window all the path down. Remove the window Eccentric person, provided you keep notebook windows. There may and be a screw in the grab Mug -- if so, remove it. If you have electric windows, pry the window switch bezel up and unplug the wiring harness connectors for the windows and door lock.3. Lift the bottom of the panel upward and outward at the same time to release the retainer steps from the inner door panel.
The Eccentric person shaft has a screw in the centre of it, underneath a cap.2. Remove the screws that attach the trim panel to the door, using a socket or screwdriver. Depending on the interior options, the screws may be cloaked under a fold of news on the door panel.
Before pulling the panel all the way off, unplug the speaker and heated mirror wiring harness connectors.
4. Reach through the access hole and unclip the inside handle linkage from the inside handle. Lift the door panel remainder of the way off the door.
