The Miata is a small, lightweight roadster produced by Mazda. It is a rear-drive car popular in autocrossing and road racing due to its near 50/50 weight distribution characteristics. The standard Miata comes with a five-speed manual transmission, though, for an additional cost, you can purchase an automatic transmission. Like most roadsters, the Miata has a convertible top. Over time, especially if the exterior trim is not taken care of, the exterior trim molding around the windshield can---and will---fade and crack. This can be an eyesore, but it can also compromise the seal around the end of the windshield allowing water, dirt and debris to get behind the molding. To prevent this from happening, replace the windshield trim if it is damaged.
Instructions
- 1
Clean the windshield with Windex before starting. You do not want dirt or debris to get lodged into the pinchweld area or underneath the new molding.
2Fold the windshield wiper arm up away from the windshield until it locks into a vertical position.
3Remove the nuts holding the wiper arms in place and pull the wiper arms off.
4Slide the tip of the trim removal tool between the trim and the windshield. Work the tool all around the outer edge of the windshield until the trim comes off.
5Install the new trim. The new trim is installed in the opposite way the old trim was removed. Orient the trim so that it fits tightly between the frame and the windshield. You may need to use the removal tool to align and adjust the trim as you move along the perimeter of the glass. Force the trim into place with your hand.
