You may not always be prepared to fix damage to your vehicle. However, you can rest easy knowing that if one particular repair should be needed, the job can be done in no time with just a few supplies. Repairing a cracked window in your 2000 Honda Civic can be done correctly as a do-it-yourself project with very little difficulty.
Instructions
- 1
Prepare a soapy cleaning solution to wash the window to be repaired. Combine the soap and water until sudsy, then wash the window, remembering to rinse and dry it when finished.
2Apply the suction cup stabilizer to the window. Push it onto the glass surface, and make sure to have the cracked areas underneath and within the enclosed suction cup space.
3Take the resin tube and put it inside the injector. Then, put the injector inside the stabilizer. There is a dedicated slot for the injector.
4Pull the injector out. The injector acts as the vacuum creator for the stabilizer, so once it is in place, the vacuum suction between the glass and stabilizer begins to increase.The suction between the glass and stabilizer will now draw the resin out of its tube and into the cracked areas.
5Lift the stabilizer off the window carefully, and apply adhesive curing film strips over the newly repaired areas. Be careful not to smudge the resin. Remove the strips after a few hours.
