1. Only the professional installing technicians are allowed to install and maintain this product.
2. Installation or maintenance by the unprofessional people might cause electric shoke or other risks and even damage the unit.
3. In the process of connecting, pay attention to the hook position, don't pull wires forcibly to avoid invalid connection.
4. Please use the attached wire of the system, otherwise the accident of fire or smoke or damage to the unit or vehicle might be caused.
5. Don't cut off any extra wire which is kept for future use, Protect the ends of wire with insulating tape.
6. In order to avoid short circuit, please disconnect the anode of the power accumulator before any connection and installation.
7. Ensure all lines are placed and protected in good condition, don't let them interfere in any moveable parts of the car such as steering wheel, gearlever, brake pedal, sliding chair, door or other parts.
8. The voice is input through AUX, so please ensure audio cable connectes well with the AUX port of the original car audio system.
9. The Citroen C5 GPS can be fit for Citroen C5.
1. The orginal car center console.
2. Pry the mahogany decorative board and take out the two screws below.
3. Pry the big board of the center console with crow.
4. Take off the big board carefully (pay attention to buckles and cables).
5. Pull out all the cable sockets at the back of the big board.
6. Take off the air conditioner outlet on the big board of the original car.
7. Take off the safety warning button and metal buckle.
8. All the components that are taken off from the big board of the original car.
9. Install all the components that are taken off from the big board of the original car in to the big navi board for DVD.
10. Finished navigation display part for DVD.
11. Use specialized detaching tools to push the metal buckle aside that are fixed on both sides of the CD hosting machine of the original car.
12. Pull out the CD hosting machine slowly(please do not pull out the buckles that are used to fix the cables of the CD hosting machine. )
13. Be careful to take off the cable socket of the CD hosting machine.
14. Remove the metal buckle and screw of the CD hosting machine.
15. Install the detached metal buckles and screws into the corresponding positions of the CD hosting machine.
16. Arrange the dedicated wires well.
17. Insert one end of the radio conversion line into the radio antenna with white connector of the original car.
18. Insert the plugs of all cables in to the corresponding sockets of DVD case.
19. Install the DVD host machine into the right position.
20. Connect the navigation antenna of navigation display for DVD well.(Please install the navigation antenna into the proper position.)
21. Insert all the cables of navigation display part for DVD well.
22. Hackle the dual USB backing line well and pull them out from the glove compartment of first officer's seat.
23. Install the navigation display part for DVD into the right position and fasten two setscrews(pay attention to the buckles around the big board).
24. Reinstall the mahogany decorative board and finish the installation.article source: http://www.car-gpssystem.com
