car satellite radio installation instruction manual

how to install satellite radio in your car

With the rapid development of technology, it has gradually become a common for us to see satellite radio installed in vehicles. Hitting the road in an older vehicle with older model of satellite radio is not so cool and awesome. You may have the inclination to install satellite radio in car.

There is a wide range in price for these satellite radios. They can be sold at a price as low as 20 dollars. They can also run at more than 300 dollars. Now let’s see how to install satellite radio in your car, which can sometimes take less than 10 minutes to finish.

Use an FM transmitter can be regarded as the simplest way to install satellite radio in your car. The majority of satellite units nowadays features a transmitting built in. If this is your case, then plug your new satellite radio into the cigarette lighter port to receive electrical power.

After doing this, you should go into the settings and select FM Transmitter. Choose an FM frequency which is not currently being used in your area. Once selection is made, tune your car's stereo to the same frequency. Your satellite radio audio should now be playing through your cars’ speakers.

When your unit does not feature a built-in transmitter, make purchase of an external one which costs as little as twenty dollars. The only disadvantage to using these systems occurs when it comes to traveling over long distances. If the frequency in use features a station broadcasted on it, there will be interference and adjustment of settings is needed.

Another option is a more permanent solution but a better quality of sound will be given, which can also solve the interference problem that comes with FM Transmitters. The disadvantage is the amount of time it can take. Besides, this option can not be applied to every car. This method allows you to directly connect your satellite unit to your oem car stereo.

What you need to do first is to discover what input connections are on the rear of your aftermarket car stereo. If it is the original installed stereo, information can be found in your owners manual.

If the radio has been replaced, or the owner manual is missing, figure it out by physically removing the radio. The type of input you are looking for is called an auxiliary audio input. Generally you can see it simply labeled as AUX. When you do not have this input, you will not be able to hook your satellite radio up directly.

We OemCarGps hope that you have a better understanding of how to install satellite radio in your car.

You May Also Like
Created by:Oem car gps
Oemcargps.com,Offer Oem Fit Aftermarket Car GPS,Car DVD,Car Stereo  for All Car Make Wholesale.