Free car dvd gps removal instruction for chevy s-10s-15

So, if you've chosen to Remove Chevy s-10s-15 stereo radio 1986-1994 on your own and don't know where to begin. You're not alone…

Free car dvd gps removal instruction for chevy s-10s-15

Step 1:
Open the glove box. Locate and remove two Phillips screws that secure the right side of the plastic dash panel surrounding the chevy s-10s-15 radio.

Step 2:
Pull out the ashtray to its extended position. Locate and remove one Phillips screw at the bottom left corner under the plastic dash panel.

Step 3:
Once all 3 screws have been removed, the dash can be pulled away from the radio.
The radio is secured to the dash by plastic brackets attached to the side of the radio. Locate and remove two 7mm bolt screws that secure these brackets to the dash.

Step 4:
Pull the chevy s-10s-15 radio out of the dash, unplug the black cable plugged into the rear of the radio. Unplug the plastic wire harness connector from the rear of the chevy s-10s-15 radio.
Plastic wire harness note:
1986-1989 models: there will be 3 plastic connectors: (1) blue, (1)white, (1)black.
1989 and newer models: there will be 1 white or blue connector.
You May Also Like