Then you should go for the basic tools for the installation procedures. Only in this way can you get everything right started. The basic tools are wire cutters, electrical tape, wire stripper, the device and the screwdriver. Remember to keep the space empty so that the car amplifier installation can be finished and done. Always keep in mind to make space for the car amplifier so that you can easily fit the auto stereo player into the car later on.
Read the technical manual and the corresponding wiring diagram before starting with the actual car stereo installation procedure. You have to place the wiring in the exact manner as shown in the diagram.
Connect the positive wire from each of the speakers to the positive terminal of the vehicle stereo from the back.
Next, connect the negative wire coming from each speaker to the negative terminal of the car audio in the back side.
Then you have to connect the ignition wires both + / red to the car stereo system. You have to be careful that when there is only one wire coming out from the speakers, they are fixed to the chassis.
Anyway, you should follow the car stereo system installation Guide step by step and in order. Do not try to skip the step and jump directly to any instruction because all these can lead to confusion and failure.
You May Also Like
- How to Install Radio DVD GPS Navigation for Toyota Corolla
- How to Install Radio DVD GPS Navigation for Toyota Reiz
- How to Install Toyota Crown Radio DVD GPS Navigation
- How to Install Toyota Highlander Radio DVD GPS Navigation
- Toyota RAV4 Radio DVD GPS Navigation Installation Guide ( Mounting Instructions )