How to update KIA navigation for your KIA K5

With continuous upgrades, car GPS becomes more and more convenient to use. Such a user-friendly unit has already been our helpful guide in the vehicle no matter when and where you go out for a car trip.

So if you don't have a car gps navigation in your car.You really need one.and the following installation guide i write for the people who have a KIA K5.if you are one of the onwers of KIA K5.Read it carefully.Don't miss it.

You May Also Like

• How to Install Honda Odyssey Radio DVD GPS Navigation
• How to Install Honda Spirior Radio DVD GPS Navigation
• Honda CRV Radio DVD GPS Navigation Installation Guide
• Hyundai IX35 Radio DVD GPS Navigation Installation Guide
• Hyundai Verna Radio DVD GPS Navigation Installation Guide

KIA GPS Navigation Entertainment System installation guide

22 photos step by step help you How to update KIA navigation for your KIA K5.

step 1:factory center console

 

step 2:Remove the small panel to the left of the steering wheel with plastic scraper.

 

step 3:Remove the 3 screws.

 

step 4:Remove the screws of the guard board beneath the steering wheel.

 

step 5:Open the latch of the side to the guard board with plastic scraper.

 

step 6:Remove the guard board beneath the steering wheel.

 

step 7:Remove the decoration panel of the outlet to the left of the steering wheel.

 

step 8:Remove the screws.

 

step 9:Remove the decoration panel from the center console.

 

step 10: Remove the screws, slide out the vent compartment panel.

 

step 11:Remove the screws used to fix the brackets of headunit, slide out the factory headunit, unplug all the connectors exposed.

 

step 12:Remove the center console behind all the parts.

 

step 13:Unplug the socket behind the factory USB interface.

 

step 14:Remove the outlets from the factory headunit, then mount them to the new headunit.

 

step 15:Remove the metal brackets underneath the factory headunit, mount it in the right place of the new headunit.

 

step 16:Special harness (Connecting the 2 factory plugs ) (for the new headunit plug) (For the back of the USB of the cigar lighter) (Connect the new headunit plug)

 

step 17:The connection between the special harness and the connectors at the back of the new headunit (the plug for the reception of radio) (plug for GPS) (plug for external microphone) (the 2 plugs connecting the factor headunit) (for the socket behind the factory USB) (put the lines in the glove box on the passenger’s side)

 

step 18:Plug all the connectors behind the new headunit.

 

step 19:Plug the connectors for new headunit into the socket behind the factory USB.

 

step 20:Mount new headunit, fix the screws.

 

step 21:Mount back the factory control panel, mount back the corresponding parts in order.

 

step 22:Replacement finished, turn it on to test all the functions.