6 Tips on How to Mount a DVD player in Car

Are you ready to take your kids or friends on a long journey or go to have fun in camping? Maybe you have the desire to get a DVD player mounted in the car for the purpose of entertainment , fun and amusement on the way. You can stand in front of two choices. One is you go to buy an all-in-one DVD player as well as LCD screen, another is that you get a plain DVD player to use with the all-ready existing LCD screens in your vehicle. here is a list of what you will need for the installation process: wire stripper, a set of basic tools, DVD owner’s manual.
1
Two ways for how to mount a dvd player in car: Use a portable model or one that mounts permanently in your vehicle. Choose the one that is suitable according to your budget and vehicle.
2
Installing a permanent DVD player takes a few hours, and some basic tools may be necessary. You have to begin with the removal of your existing car stereo, including the dash fascia and trim.
3
Separate the existing car stereo unit from its mounting brackets and wiring harness.
4
Refer to your DVD player's owner's manual to see if the new DVD player head unit needs different mounting brackets than the ones that is suitable for your old stereo. If new brackets need to be mounted, then you should remove the old ones first and set them aside.
5
If you want to install a DVD changer in the trunk or under a seat, run the power and auxiliary audio and video cables to your stereo head unit before you mount the new head unit and finishing installation.
6
After reattaching the wiring harness, secure the DVD player to the mounting brackets in the dash. Make sure the DVD player works under normal condition before you retattach the dashboard trim and fascia.
We OemCarGps hope that the instructions above are useful for you and wish you a good time with the DVD player.