Mounting Instructions
step 1. VW MAGOTAN factory headunit
step 2. Lift the 2 latch at the bottom of the decoration panel.
step 3. Lift the latch in the middle of the decoration panel, then slide out the decoration panel.
step 4. Remove the 4 screws.
step 5. Remove the factory headunit, then unplug all the connectors exposed. (As shown in the picture.)
step 6. Well plan the GPS aerial for new headunit and the rear-view camera connectors (optional) as shown in the picture.
step 7. Connect the new radio aerial conversion lines with the factory radio aerial. (As shown in the picture.)
step 8. Plug the connectors.
step 9. Well plan all the harness, put the new headunit into the dash, fix the 4 screws.
step 10. Mount the decoraton panel and push it inside until the latch lock it.
step 11. Replacement finished and turn it on to test all the functions.
step 12. Effect after the whole process