Bumper fixed
Bumper side fixed
Hood body work
Hood close up
Hood line fixed
Passenger door on
Passenger fender on
Passenger front body work
Passenger rear body workHi folks -- photos are from son-in-law Tony's car paint project. This is the first of two cars to be painted -- the CRX is sort of practice for the 1967 Cougar that will follow. Tony has learned a lot about how much time it takes to do a good job, and also the many skills that can only be learned by doing. Now we are waiting for that final result!
Meant to get this off last night, but I was pretty tired and ended up not being able to finish it. Well, so far I was able to get all the panels back on, putting me one step away from primering the whole car. That step, masking off everything, I learned takes much longer than you would think, at least if you do it right, which I didn't do exactly right last time (I had a couple areas that weren't perfectly straight and one area where a little paint got on a window, no big deal though, it should wipe off with some Acetone). I am hoping between tomorrow and Thursday evenings I can mask it off, last time I did it in one night...err, well it took me till 4:30 A.M. but I finished it. Anyhow, if all goes as planned, I'll spray the 3 coats of primer surfacer (primer that can be sanded to "surface" or smooth everything out) on Friday night, spend some time Saturday block sanding and then washing the car, and then spraying the color and clear on Sunday. That assuming everything goes as planned, lets cross our fingers. Also, for any interested, I am attaching the pictures of the car reassembled, as you can see there was quite a few areas that required some body work. Quite a few panels required some work to get them straight, and both bumpers took me half a day with some JB Weld, a file and some sandpaper to reform, reshape and make them fit as they should. In the two front bumper pictures, the lighter gray areas (on the lower part they are all the way on the left and right sides of the big opening in front of the radiator and on the left of the other bumper picture there are two blotches in the area right under the hole where the blinkers go) are JB Weld, filed down, then sanded. They turned out pretty smooth, its pretty likely they won't be noticeable after the primer gets sprayed and then sanded. Anyhow, off to start taping it all off, hopefully between tonight and tomorrow night I can get it ready enough to spray on Friday night.
