Caliper bolts are designed to secure the brake caliper to the vehicle rotor, allowing the brake pads to sit inside the caliper. When the brake pedal is applied, the pads are moved toward the rotor by a hydraulic piston in the caliper to stop the vehicle. The caliper bolts are about 5 inches long with the last inch threaded so that the caliper can slide along the bolts to adjust the brakes properly. Save time and money by removing the caliper bolts yourself.
Instructions
- 1
Set the emergency brake of the vehicle and place a wood block behind one of the rear tires to prevent the vehicle from rolling. Loosen the lug nuts on the tire with a tire tool about one full turn.
2Lift up the vehicle with a floor jack and place a jack stand under the axle near the tire you are removing. Lower the vehicle so that it rests on the jack stand. Remove the floor jack.
3Take the tire off the wheel hub by unfastening the lug nuts with the tire tool. Set the tire aside. Locate the caliper bolts on the top and bottom of the brake caliper.
4Unfasten the brake caliper bolts with a socket wrench to loosen them until you can slide the bolts out of the caliper by hand. Set the bolts aside.
