Automotive brakes are crucial for the proper functioning of your car. Brakes can become stuck for a number of different reasons, and mechanic bills for brake maintenance can be expensive. A few quick checks of your braking system can help prevent a trip to the mechanic.
Instructions
- 1
Check the cable that attaches the brake pedal to the braking system; it can be accessed on the underside of the car just beneath the brake pedal. Look for anything jamming or blocking the cable line.
2Grip the brake cable by the housing and pull it firmly to the side. This action is sometimes enough to free the cable.
3Check the emergency-brake cable. This cable runs from a handbrake between the front seats or from a foot pedal to the brake underneath the car.
4Grip the emergency brake cable by the housing and pull it firmly to the side. This is sometimes enough to free the emergency brake cable.
5Check the front driver's-side brake drum. Lift the front driver's-side tire off the ground using an automotive jack; remove a the tire with a tire iron to access the brake drum.
6Check the brake drum for movement. If it will not move, strike the brake with a hammer. This will sometimes unstick the brakes.
7Replace the tire and lower the car to the ground.
8Check the front passenger-side brake drum. Lift the front passenger-side tire off the ground using an automotive jack; remove the tire with a tire iron to access the brake drum.
9Check the brake drum for movement. If it will not move, strike the brake with a hammer. This will sometimes unstick the brakes.
10Replace the tire and lower the car to the ground.
11Check both front brake drums for ice. If there is ice, hit the brake drum with a hammer to knock it loose. Run the car's engine to help melt the ice.
