The 2004 Ford F550 4X4 pickup was one of Ford's largest trucks, capable of pulling huge loads. These trucks have heavy-duty components, including the brakes, which have to stop a lot of mass. The rotors on these trucks wear down over time, and when it comes time to change the brake pads, the rotors should be removed for replacement or to be turned. First, you have to remove the old rotors, which should take 30 minutes.
Instructions
- 1
Slide the jack underneath the front axle. Lift up the front axle of the truck using the jack and set the axle down on the heavy-duty jack stands so that the front wheels are off of the ground. Unbolt the wheels using the tire iron and lift them off of the hubs.
2Unbolt the brake caliper anchor plate from the backside of the steering knuckle using the -inch ratchet and socket. Carefully lift it off of the rotor and set it down onto a jack stand so the caliper's weight is supported completely.
3Hold the face of the rotor with both hands. Pull the rotor straight off of the hub and away from the front axle.
