It is common for many brake rotors and calipers to develop rust on their outer surfaces, even on new vehicles. For the most part, this is not an issue that affects performance. It is however, annoying for owners that don't want their otherwise sharp looking vehicles marred by the rusty brake parts. Fortunately a relatively simple cleaning process that cleans off the rust and protects the surface from it happening again.
Instructions
- 1
Pour 1/2 gallon of the Fast Etch rust remover in the plastic bucket. You can use a similar product that both removes rust and leaves a zinc phosphate coating on the metal.
2Place the brake parts in the bucket and allow them to soak for 15 minutes.
3Remove the parts and apply additional rust remover by brushing in on with the paint brush. Use the steel wool to scrub any areas with remaining rust. Place the parts back in the bucket to soak for another 15 minutes.
4Remove the parts, and dry them with a clean rag. Use paper towels to apply acetone to any surfaces to which the brake pads make contact, and then scrub them with steel wool.
5Wipe the parts with a clean rag that has been dampened with water, and allow them to air dry.